1. Home
  2. Vol 4, No 2 (2023)
  3. Gjukaj

Numerical Behavior of Extended End-Plate Bolted Connection under Monotonic Loading

Anita Gjukaj, Fidan Salihu, Ali Muriqi, Petar Cvetanovski

Abstract


Extended end-plate connections, which act as joints providing resistance against moments between beams and columns, are commonly categorized as semi-rigid or partial-strength connections. The reason for their extensive application in steel frame constructions lies in their straightforward design, their ability to be reproduced easily, and the convenience they offer in the fabrication process. This research used the ABAQUS FE software to construct a three-dimensional finite element model (FEM) with the main objective of exploring how different geometric parameters impact the behavior of the extended end-plate bolted connection, which functions as a semi-rigid, partial-strength beam-to-column connection. Accurately determining the moment-rotation relationship and connection stiffness is of utmost importance for semi-rigid connections. The developed FEM models incorporate various factors such as geometric and material non-linearities, bolt pretension force, as well as contact and sliding between the connection elements. To establish the credibility of the numerical outcomes, the developed FEM model was meticulously calibrated and verified against experimental data obtained from previous studies available in the literature. Subsequently, using the validated finite element model, a parametric investigation was undertaken to evaluate the influence of distinct geometric parameters, namely the thickness of the end plate and column web stiffeners. This numerical model facilitates a comprehensive analysis of the extended end-plate bolted connection, encompassing critical aspects such as the moment-rotation curve and failure mode. The results demonstrated that the analyzed finite element model aligns well with experimental findings and that the use of column stiffeners is inevitable in the joint, as well as a moderated thickness of the end plate.

 

Doi: 10.28991/HIJ-2023-04-02-04

Full Text: PDF


Keywords


Beam-to-Column Connection; FEM Model; Validation of FE; Column Stiffeners; End-Plate Stiffeners.

References


EN 1993-1-8. (2005). Eurocode 3: Design of steel structures – Part 1-8: Design of joints. European committee for standardization, Brussels, Belgium.

Zoetemeijer, P. (1974). Design Method for the Tension Side of Statically Loaded, Bolted Beam-To-Column Connections. Heron, 20(1), 1-59.

Weynand, K., Jaspart, J.-P., & Steenhuis, M. (1996). The stiffness model of revised annex j of Eurocode 3. Connections in Steel Structures III, 441–452, Pergamon, Oxford, United Kingdom. doi:10.1016/b978-008042821-5/50100-0.

Gjukaj, A., Cvetanovski, P., & Gashi, F. (2023). The Effect of Column Web Stiffeners on Moment Resistance and Ductility of Extended End-Plate Bolted Connection. 2nd Croatian Conference on Earthquake Engineering ‒ 2CroCEE, The Westin Zagreb, Croatia, doi:10.5592/co/2crocee.2023.8.

Aggarwal, A. K., & Coates, R. C. (1986). Moment-rotation characteristics of bolted beam-column connections. Journal of Constructional Steel Research, 6(4), 303–318. doi:10.1016/0143-974x(86)90010-6.

Mehdi, B. C., Boumechra, N., Missoum, A., & Bouchair, A. (2022). Connection of a Steel Column Base Plate: Mechanical Behavior and Stiffening Effects. Civil Engineering Journal, 8(9), 1764-1786. doi:10.28991/CEJ-2022-08-09-02.

Bahaari, M. R., & Sherbourne, A. N. (2000). Behavior of eight-bolt large capacity endplate connections. Computers and Structures, 77(3), 315–325. doi:10.1016/S0045-7949(99)00218-7.

Kukreti, A. R., & Zhou, F. F. (2006). Eight-bolt endplate connection and its influence on frame behavior. Engineering Structures, 28(11), 1483–1493. doi:10.1016/j.engstruct.2005.09.021.

Popov, E. P., & Takhirov, S. M. (2002). Bolted large seismic steel beam-to-column connections part 1: Experimental study. Engineering Structures, 24(12), 1523–1534. doi:10.1016/S0141-0296(02)00086-X.

Shi, Y., Shi, G., & Wang, Y. (2007). Experimental and theoretical analysis of the moment-rotation behaviour of stiffened extended end-plate connections. Journal of Constructional Steel Research, 63(9), 1279–1293. doi:10.1016/j.jcsr.2006.11.008.

Shi, G., Shi, Y., Wang, Y., & Bradford, M. A. (2008). Numerical simulation of steel pretensioned bolted end-plate connections of different types and details. Engineering Structures, 30(10), 2677–2686. doi:10.1016/j.engstruct.2008.02.013.

Augusto, H., Simões Da Silva, L., Rebelo, C., & Castro, J. M. (2016). Characterization of web panel components in double-extended bolted end-plate steel joints. Journal of Constructional Steel Research, 116(116), 271–293. doi:10.1016/j.jcsr.2015.08.022.

Augusto, H., Simões da Silva, L., Rebelo, C., & Castro, J. M. (2017). Cyclic behaviour characterization of web panel components in bolted end-plate steel joints. Journal of Constructional Steel Research, 133(133), 310–333. doi:10.1016/j.jcsr.2017.01.021.

Abidelah, A., Bouchaïr, A., & Kerdal, D. E. (2012). Experimental and analytical behavior of bolted end-plate connections with or without stiffeners. Journal of Constructional Steel Research, 76, 13–27. doi:10.1016/j.jcsr.2012.04.004.

Culache, G., Byfield, M. P., Ferguson, N. S., & Tyas, A. (2017). Robustness of Beam-to-Column End-Plate Moment Connections with Stainless Steel Bolts Subjected to High Rates of Loading. Journal of Structural Engineering, 143(6), 4017015. doi:10.1061/(asce)st.1943-541x.0001707.

Plaitano, F., Stratan, A., & Nastri, E. (2022). Simplified Modelling of Failure in High Strength Bolts under Combined Tension and Bending. Journal of Composites Science, 6(10). doi:10.3390/jcs6100302.

Gao, J. D., Yuan, H. X., Du, X. X., Hu, X. B., & Theofanous, M. (2020). Structural behaviour of stainless steel double extended end-plate beam-to-column joints under monotonic loading. Thin-Walled Structures, 151, 106743. doi:10.1016/j.tws.2020.106743.

Maggi, Y. I., Gonçalves, R. M., Leon, R. T., & Ribeiro, L. F. L. (2005). Parametric analysis of steel bolted end plate connections using finite element modeling. Journal of Constructional Steel Research, 61(5), 689–708. doi:10.1016/j.jcsr.2004.12.001.

Ismail, R. E. S., Fahmy, A. S., Khalifa, A. M., & Mohamed, Y. M. (2016). Numerical study on ultimate behaviour of bolted end-plate steel connections. Latin American Journal of Solids and Structures, 13(1), 1–22. doi:10.1590/1679-78251579.

Bahaz, A., Amara, S., Jaspart, J. P., & Demonceau, J. F. (2018). Analysis of the Behaviour of Semi Rigid Steel End Plate Connections. MATEC Web of Conferences, 149, 02058. doi:10.1051/matecconf/201814902058.

Luo, L., Du, M., Yuan, J., Shi, J., Yu, S., & Zhang, Y. (2020). Parametric Analysis and Stiffness Investigation of Extended End-Plate Connection. Materials, 13(22), 5133. doi:10.3390/ma13225133.

Dessouki, A. K., Youssef, A. H., & Ibrahim, M. M. (2013). Behavior of I-beam bolted extended end-plate moment connections. Ain Shams Engineering Journal, 4(4), 685–699. doi:10.1016/j.asej.2013.03.004.

ABAQUS. (2014). Abaqus analysis user’s manual (Version 16.4). ABAQUS, Johnston, United States.

Jaspart, J. P. (1991). Study of the semi-rigid behaviour of beam-to-column joints and of its influence on the stability and strength of steel building frames. PhD Thesis, University of Liège, Liège, Belgium.

Onyeka, F. C., Okeke, T. E., & Mama, B. O. (2022). Static Elastic Bending Analysis of a Three-Dimensional Clamped Thick Rectangular Plate using Energy Method. HighTech and Innovation Journal, 3(3), 267-281. doi:10.28991/HIJ-2022-03-03-03.


Full Text: PDF

DOI: 10.28991/HIJ-2023-04-02-04

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Anita Gjukaj, Fidan Salihu, Ali Muriqi, Petar Cvetanovski