Production Data Analysis Techniques for the Evaluation of the Estimated Ultimate Recovery (EUR) in Oil and Gas Reservoirs

Saber Kh. Elmabrouk, Walid Mohamed Mahmud

Abstract


The calculation of oil reserves (estimate ultimate recovery, EUR) is required for reservoir management. It is important to differentiate between oil reserves and oil resources. The latter is roughly defined as the sum of recoverable and unrecoverable volumes of oil in place; whereas, the oil reserves can be defined as those amounts of oil anticipated to be commercially recoverable from a given date under defined conditions. However, there is always uncertainty when making reserve estimates, and the main source of uncertainty is the lack of available geological data. Depending on the quantity and quality of the available data, different methods are used for the evaluation of the EUR. A number of essentially straight-line extrapolation techniques (production data analysis) have been proposed to estimate the EUR for oil and gas wells. Thus, a detailed analysis of past performance of oil and water production data is required in order to predict the future performance of the oil and gas wells. This work utilized seven straight-line extrapolation techniques to estimate and compare the values of EUR of three oil wells from the same reservoir. The comparison shows very similar estimated EUR.

 

Doi: 10.28991/HIJ-2022-03-01-09

Full Text: PDF


Keywords


Estimated Ultimate Recovery; Water Oil Ratio; Reserve; X-plot; Production Data Analysis; Decline Curve Analysis.

References


Liu, Y.-Y., Ma, X.-H., Zhang, X.-W., Guo, W., Kang, L.-X., Yu, R.-Z., & Sun, Y.-P. (2021). A deep-learning-based prediction method of the Estimated Ultimate Recovery (EUR) of shale gas wells. Petroleum Science, 18(5), 1450–1464. doi:10.1016/j.petsci.2021.08.007.

Mehana, M., Callard, J., Kang, Q., & Viswanathan, H. (2020). Monte Carlo simulation and production analysis for ultimate recovery estimation of shale wells. Journal of Natural Gas Science and Engineering, 83, 103584. doi:10.1016/j.jngse.2020.103584.

Wang, K., Li, H., Wang, J., Jiang, B., Bu, C., Zhang, Q., & Luo, W. (2017). Predicting production and estimated ultimate recoveries for shale gas wells: A new methodology approach. Applied Energy, 206, 1416–1431. doi:10.1016/j.apenergy.2017.09.119.

Karacaer, C. ., & Onur, M. . (2012). Analytical Probabilistic Reserve Estimation by Volumetric Method and Aggregation of Resources. All Days. doi:10.2118/162875-ms.

Sun, H., Cao, W., Li, J., Jia, W., Li, Y., Wu, Y., … Meng, G. (2021). A material balance based practical analysis method to improve the dynamic reserve evaluation reliability of ultra-deep gas reservoirs with ultra-high pressure. Natural Gas Industry B, 8(1), 79–87. doi:10.1016/j.ngib.2020.07.004.

Hu, Y., Weijermars, R., Zuo, L., & Yu, W. (2018). Benchmarking EUR estimates for hydraulically fractured wells with and without fracture hits using various DCA methods. Journal of Petroleum Science and Engineering, 162, 617–632. doi:10.1016/j.petrol.2017.10.079.

Okoro, E. E., Okoh, A., Ekeinde, E. B., & Dosunmu, A. (2019). Reserve Estimation Using Decline Curve Analysis for Boundary-Dominated Flow Dry Gas Wells. Arabian Journal for Science and Engineering, 44(6), 6195–6204. doi:10.1007/s13369-019-03749-2.

Al-Fatlawi, O. F. (2018). Numerical simulation for the reserve estimation and production optimization from tight gas reservoirs Doctoral dissertation, Curtin University, Public University in Perth, Australia.

Rabiei, Minou, Ritu Gupta, Yaw Peng Cheong, and Gerardo A. Sanchez Soto. “A Novel Approach in Extracting Predictive Information from Water-Oil Ratio for Enhanced Water Production Mechanism Diagnosis.” The APPEA Journal 50, no. 1 (2010): 567. doi:10.1071/aj09034.

Espinel Diaz, A. L., & Barrufet, M. A. (2009). A Generalized Semi-analytical and Statistical Model to Estimate Oil and Water Production, Pore Volume Injected, and Ultimate Recovery in Mature Waterflooding Projects. All Days. doi:10.2118/122749-ms.

Ben Mahmud, H., Huque, M. M., & Mandal, P. C. (2017). Developing Optimum Production Strategy of Kailashtilla Gas Field and Economic Analysis. ICIPEG 2016, 809–817. doi:10.1007/978-981-10-3650-7_70.

Busahmin, B., Saeid, N. H., Alusta, G., & Zahran, E. S. M. (2017). Review on hole cleaning for horizontal wells. ARPN Journal of Engineering and Applied Sciences, 12(16), 4697-4708.

Ahlbrandt, T. S. (2001). The sirte basin province of Libya: sirte-zelten total petroleum system. US Department of the Interior, US Geological Survey, 1-29.

Arps, J. J. (1945). Analysis of Decline Curves. Transactions of the AIME, 160(01), 228–247. doi:10.2118/945228-g.

Bondar, V. V., & Blasingame, T. A. (2002). Analysis and interpretation of water-oil-ratio performance. Journal Society of Petroleum Engineers.

Blasingame, T. A., Ilk, D., & Reese, P. D. (2007). Estimation of Reserves Using the Reciprocal Rate Method. All Days. doi:10.2118/107981-ms.

Lo, K. K., Warner, H. R., & Johnson, J. B. (1990). A Study of the Post-Breakthrough Characteristics of Waterflood. All Days. doi:10.2118/20064-ms.

Chan, K.S. (1995) Water Control Diagnostic Plots. Paper SPE 30775 presented at the 1995 Annual Technical Conference and Exhibition, Dallas, TX, 22-25 October.

Ershaghi, I., & Omorigie, O. (1978). A Method for Extrapolation of Cut vs Recovery Curves. Journal of Petroleum Technology, 30(02), 203–204. doi:10.2118/6977-pa.

Ershaghi, I., & Abdassah, D. (1984). A Prediction Technique for Immiscible Processes Using Field Performance Data. Journal of Petroleum Technology, 36(04), 664–670. doi:10.2118/10068-pa.

Lijek, S. J. (1989). Simple Performance Plots Used in Rate-Time Determination and Waterflood Analysis. SPE Annual Technical Conference and Exhibition. doi:10.2118/19847-ms.

Yang, Z. (2009). A New Diagnostic Analysis Method for Waterflood Performance. SPE Reservoir Evaluation & Engineering, 12(02), 341–351. doi:10.2118/113856-pa.

Yang, Z. (2012). Production-Performance Diagnostics Using Field-Production Data and Analytical Models: Method and Case Study for the Hydraulically Fractured South Belridge Diatomite. SPE Reservoir Evaluation & Engineering, 15(06), 712–724. doi:10.2118/153138-pa.

Yang, Z. (2017). Clarifying and Improving the Application of Waterflood Analytical Methods in X-Plot Conditions – From Empirical Approach to Analytical Approach. Day 3 Tue, April 25, 2017. doi:10.2118/185726-ms.

Meulenbroek, B., Gargar, N. K., & Bruining, H. (2020). An engineering approach to study the effect of saturation-dependent capillary diffusion on radial Buckley-Leverett flow. Computational Geosciences, 25(2), 637–653. doi:10.1007/s10596-020-09993-y.


Full Text: PDF

DOI: 10.28991/HIJ-2022-03-01-09

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 Walid Mohamed Mahmud